Inflation function: The built-in battery and high-power air compressor provide maximum 85Psi inflating pressure even without external power cord, to inflate a 205/55 R16 Tyre from 0 PSI to 35 PSI within 4 minutes. In addition, it is also suitable for other inflatable items, such as balls, motorcycle tires, etc.

Intelligent control system: With the LCD display, the parameters are more accurate, the values are easily to be read. With four optional pressure units: PSI, bar, KPa, Kg / cm2, Compressor will be automatically shut down, once the preset pressure has been reached, no focus on inflating is needed. Each constant inflation will be automatically stopped in ten minutes to prevent the overheating of the air compressor, so as to protect the compressor. Tyre Pressure Gauge is also available.

Portable Power Supply function: The built-in high-performance battery allows you in case of an emergency to charge your digital products, such as smartphone, IPAD, etc. Outdoor Lighting: 3 lighting modes as Steady on, Flashing and S.O.S. for lighting in dark or in an emergency

ROGERAB DUO (Set of four)

• Easy to Fit: ROGERAB Thermoplastic Urethane Buffer can fit very easily in 20 minutes without using tools or removing any of the suspension parts of your car.
• Enhances Cornering Stability: Specially reinforced oval hole design supports the leaning angle of the car on turns and reduces Rolling Pitching in SUVs and MPVs
• Intermittent Dampener: The transmittance of suspension noise to the chassis reduces due to effect of ROGERAB Thermoplastic Urethane Buffer.
• Interchangeable: ROGERAB Thermoplastic Urethane Buffer is interchangeable in various car models
• Traction Enhancer: The downward force of the ROGERAB Thermoplastic Urethane Buffer increases the traction of the wheels and enhances the road grip of Tyres.
• Enhances Suspensions Life Span: Fitting ROGERAB Thermoplastic Urethane Buffer on damper coil springs reduces inside hydraulic pressure of dampers and hence increasing the life span of dampers & suspension parts.
• Designed for Variable Terrains and Cars: Specially designed for withered and treacherous road conditions. Made from very high grade compressional and wear resistance urethane material with years of R & D.
• Warranty: Replacement warranty of 1 years, replacement warranty against deformation or breakage of ROGERAB Thermoplastic Urethane Buffer

How It Works (Technicality) :

• ROGERAB Thermoplastic Urethane Buffer is manufactured with special ‘Stoichiometry’ processing conditions, which gives the dual benefit of flexibility and strength
• It is designed according to ‘Castiglioni’s’ theorem of spring deflection, which reduces suspension coil spring deflections
• Circumferential re-enforced oval hole design that interferes to uneven road surfaces
• It’s concave and deep groove design helps in easy fitment & retention.
• It is a strut compensator which helps in distribution of road jerks evenly.
• Its extended linear force, increases landing force of Tyres.• ROGERAB Thermoplastic Urethane Buffer is manufactured according to variable coil spring pitches and wire dimensions of Indian cars that helps in customized fit for different car models.

ROGERAB translates Uplift, Downward Force and Thrust in symmetrical proportions keeping your car healthy for longer periods of time.

Includes:

1 x Screen
4 x Valve Mounted External Sensors
4 x Anti-Theft Sensor Rings
4 x CR1632 Batteries
1 x User Manual
1 x Self Adhesive Base Plate x1
1 x Suction Plate
1 x Mounting frame for LCD monitor
2 x AAA 1.5v battery
1 x Vehicle powered Cigarette power cable

Specifications:

Transmitter:
Frequency:433.92MHz
Operation temperature:-40ºC∼125ºC
Dimensions:Diameter 20.5mm x Length 20mm

Monitor receiver:
Frequency:433.92MHz
Operation temperature:-20ºC∼;80ºC
Dimensions:Diameter 91mm x 73.5mm x 22mm

What material are AlloyGators made from?
AlloyGators are made from a super tough nylon which is flexible and won’t damage your alloy wheels during fitting, but is tough enough to give superior protection.

How permanent is the colour?
Colour runs consistently throughout the wheel protectors, meaning that there is no damage to colour, even after impact with a kerb. We recommend you regularly clean your wheels and AlloyGators with normal car shampoo or universal wheel cleaners suitable for delicate finishes like chrome. Avoid harsh cleaners and thick, brush-on tyre shines used by some hand car-washes.

How do I remove my AlloyGators?
To remove an AlloyGator, simply jack up the car, fully deflate the tyre, remove the plastic joining clip and carefully prise the profile up around the joint area. Firmly tap the face of the AlloyGator using a rubber mallet on the side which has the hole in it. This will then release the glue and open up the joint. Once the joint is open carefully prise the profile out of its seated position from the tyre side of the wheel, starting with the end without the hole and using a tyre lever or flat bladed screwdriver along the side and under the profile, prising in an upward motion. Once the end of the profile is free from the wheel and tyre then carefully pull it out from its position across thetyre wall in an outward motion in order to prevent any damage to the wheel from the stainlesssteel clips.